Page 1 of 1
Want to reduce filter noise..
Posted:
Wed Aug 01, 2007 6:30 pmby Andy
Just got a nice power filter and its set against the top frame of my glass tank. My water level is as high as I'd like it to be, about 4 inches from the top. It's creating so much noise though with the splashing of the water as it hits the surface which is getting really annoying..does anybody have any suggestions on how to reduce this noise? Besides adding water?
Posted:
Wed Aug 01, 2007 6:39 pmby adam85491
Some people suggest silconing a piece of plexiglass from the lip of the filter to the water to reduce noise..I just got use to it.
Posted:
Wed Aug 01, 2007 6:44 pmby Safdar
Haha i got used to it too
plus it creates bubles and tito likes chasing them
Posted:
Wed Aug 01, 2007 6:51 pmby SpotsMama
Another thing you can do, sort of like attaching the piece of plexiglass, if your equipment will allow it, is to angle the water flow towards the wall of the tank. That will make it quieter.
Posted:
Wed Aug 01, 2007 6:59 pmby Safdar
oo what i used to do it
you those paper cd covers with the plastic things in the middle
its like a circle and u can see through it
I hope you know what im talking about
I cut the clear plastic out and taped it to the filter
And the water just flowed on the plastic
Posted:
Wed Aug 01, 2007 9:54 pmby steve
Posted:
Thu Aug 02, 2007 9:50 amby turtlesrock77
You can build some kind of attachment. I cut the bottoms off of disposable Glad containers and attached them to the top of the filter with wire. It's pretty quiet now.