Basic set up with 1/2" plywood, 2x2's, 2x4's, duradeck vinyl used for sundecks. Cut outs for filter system hoses.
Frame in place over cement block supports.
Pond in place, leveled, adding plexiglass on one side and most of front (back against wall so didnt add there)
removable side piece makes for easy access.
Side piece in place, exit ramp added (Vinyl coated plate rack from wall mart)
All done! Lights suspended from 2x4 with powerbar on the back and has a stainless rack screwed to the bottom to hold the lamp that has a ceramic heat bulb and the other clamp lamp is for the UVB bulb. Installed a separate GFI plug in for filter, and ebo jagger heater (250 watt) that seems to hold temp. at 72/73 at most right now. Lookin good...get Fred!
"Hmmmm this must be the lake!"
1/2 hr later...almost ready to dive in.
mad swim to the exit!
No problem getting out!! Later removed vinyl from exit "ladder"
"Ahhh, leg tan!"
"WOW, satellite TV!! Turn on Animal Network!"
Well folks, thats it!...now we'll see if it appears here??
